How’d you set that up with Opnsense fail over? I have an opnsense VM with input straight from the ISPs FTTP box to the NIC on my server. So I can’t fail over to my second proxmox box without swapping the cable over.
How’d you set that up with Opnsense fail over? I have an opnsense VM with input straight from the ISPs FTTP box to the NIC on my server. So I can’t fail over to my second proxmox box without swapping the cable over.
Run your own DNS server on your network, such as Unbound or pihole. Setup the overrides so that domain.example.lan resolves to a local IP. Set your upstream DNS to something like 1.1.1.1 to resolve everything else. Set your DHCP to give out the IP of the DNS server so clients will use it
You don’t need to add block lists if you don’t want.
You can also run a reverse proxy on your lan and configure your DNS so that service1.example.lan and service2.example.lan both point to the same IP. The reverse proxy then redirects the request based on the requested domain name, whether that’s on a separate server or on the same server on a different port.
As someone who worked on a pre-systemd linux system with multiple NICs and needed them all configured automatically from an OS image based on where it was in the rack, I can’t stress enough how good deterministic interface names are.
Booting up a system and each time having different names for each NIC was a nightmare.
Frankly 90+% of what systemd has done is tremendously positive and makes linux a better operating system to use, both for sys admins and end users.
I don’t understand it either. On one hand people say don’t remember addresses, use DNS and on the other DNS relies on static addresses but then every device is “supposed” to have random addresses via SLAAC or privacy addresses. It just doesn’t seem to tie together very well, but if you use them like IPv4 addresses you’re apparently doing it wrong.
RAID IS NOT BACKUP RAID IS NOT BACKUP RAID IS NOT BACKUP
Don’t use Red drives for a NAS!! You need the Red Plus (or is it red pro) disks as they’re CMR.
I’d go for Ultrastar drives personally. There’s a few really good videos online analyzing the backblaze stats for different drives that are well worth watching.
Or save yourself a character and just yay
I received so much spam and abuse of my network from .xyz domains that they are fully blocked in every conceivable way from being accessed or accessing my network.
Pretty sure my Seagate usb disks I use for backup are SMR and sustained writes are awfully slow. Luckily I’ve discovered restic for backing up which lowered a 1.5tb weekly incremental backup from 9hrs to 1 min.
Same as any OS, yes
It doesn’t tell you up front that it’s going to break
I highly recommend watching this guys videos on his analysis of the backblaze data https://www.youtube.com/watch?v=IgJ6YolLxYE&t=1
And a comparison of the difference WD drive colours, which might not be what you expect https://www.youtube.com/watch?v=QDyqNry_mDo&t=2
What utter BS. Stop spreading FUD from others. A simple search would find the source code https://github.com/snapcore/
Snaps are open source, including the store.
And why I no longer run NC. Every time it would fuck itself to death and I’d have to start from scratch again.
Ahh yes, the first time it is defined is in the conclusion after being used 25 times previously in the article.
Thank you! I hate unexplained acronyms
I skimmed through it and have no idea what BBR stands for.
If you can’t tell the difference between a FLAC and an MP3 that’s fine. I can through a cheap pair of headphones and it’s enough that I re-ripped my CDs to FLAC from 320mp3 and they really shine now.
I’ve been using it for a few years. Really handy way if avoiding cooperate firewall rules.