This occurred overnight around 5am UTC/1am EDT. CS checks in once an hour, so some machines escaped the bad update. If your machines were totally off overnight, consider yourself lucky

Schlage’s Zwave/Zigbee stuff works really well with Home Assistant. Ours have been hooked up since day 1 and don’t have any issues that I know of

Mine is already talking about this news in a negative light. Makes my life easier to bring in opentofu

Those look great together. You won’t notice the line up difference once it’s all done.
We have the floor tiles on the wall in our main bathroom, but they’re extra long so it doesn’t look same-y. Plus the shower glass breaks up the tile so it doesn’t immediately look the same.
In the other bathrooms, we have the same style of square tile on the floor and wall, but the wall is a smaller tile to be more stable while the floor is larger tile for the style we wanted.

If there’s an option on the AP to not permit link local routing within a vlan/ssid, that will force all traffic up to the firewall. Then you can block intrazone traffic at the firewall level for that vlan.
I’ve seen this in Meraki hardware where it’s referred to as “client isolation”. Ubiquiti might be able to do this too.

Allagans secretly powering Home Assistant

In shorter terms to what the other comment said, your website won’t work in networks that use DNS served by your DC. The website is fine on the Internet, but less so at home or at an office/on a VPN if you’re an enterprise.
“I can’t go to example.com on the VPN!” was a semi common ticket at my last company 🙃

You do have to add flathub to the discover store, but that’s a one time thing and you’re good afterwards

Not sure what temp and humidity levels a terrarium is expected to have, but Shelly makes a good device for monitoring both - https://www.shelly.com/en/products/shop/shelly-h-and-t-white.
Or one with a screen (still smart) - https://www.shelly.com/en-us/products/shop/shelly-h-and-t-gen3-1/
We use the latter in our bedroom which triggers the power outlet to a humidifier if it gets too dry when we’re sick.

Short answer, likely yes. It’s not definitive, you could still slip by after sending enough mail, but you are also very likely to get whacked because that VPS IP doesn’t have an email sending reputation.

Longer answer, email gateways like Google, Microsoft, and Proofpoint don’t really care who owns what IP. Well, they might, but they’re more concerned about the sending habits of an IP. While you might send good mail from that IP, there’s no reputation for it, so you could be whacked for having a neutral reputation (the ol’ credit score dilemma but for email).
In order to have a good reputation, you have to send a large volume of messages very gradually over several weeks to “warm” your IP as a reputable sender. I went over this slightly more in detail in another reply, but this article is pretty concise on how an enterprise accomplishes this with a dedicated IP at a provider like SendGrid: https://docs.sendgrid.com/ui/sending-email/warming-up-an-ip-address

It’s about sample size. Mail gateways won’t designate an IP as a reputable sending IP until it assesses a large volume of mail sent over a long period of time. You can’t send the quantity it wants all at once or even in a short window because then you’ll be designated as a spammer. So you start small with a few a day and gradually ramp up sending over multiple weeks or months to eventually send several thousands of messages in that period.

Spammers and malicious actors too often spin up new IPs for sending mail, so gateway patterns already implicitly mandate that email should come from IPs it’s already judged reputable.

You as an individual can’t reasonably warm your own IP. This is why services like Amazon SES or Sendgrid exist because they have huge IP pools that are ready to go. Plus, those services are very concerned with reputation and have bounce/complaint metrics defined to warn customers that abuse or poorly configure their sending habits.

This next example is what I’m most familiar with, but I’m sure there are other services like this. If you’re a big enterprise and want your own dedicated sending IP because you’re concerned about using a shared pool, you could use something like Amazon Pinpoint which allocate IPs for your org to use in SES, but they have to be warmed before you switch your production workloads over to it full-time. It automates some of the gradual-ness of warming so you use a mix of SES plus your Pinpoint IPs to keep mail flowing for your product.

It looks like Sendgrid also does dedicated IP warming guard rails too. This article is pretty decent for understanding how it works - https://docs.sendgrid.com/ui/sending-email/warming-up-an-ip-address The per-day warming limits give you an idea of what scale this kind of process is used for.

Definitely listen to this. IP Warming is a very real problem and you have to send thousands of messages at a very gradual rate for most email gateways to 1) mark you as a proper email sender, and 2) classify you as a reputable one that isn’t sending spam. Using a public/private cloud IP isn’t enough, it should be a service already used for mail sending.

If you self host sending email and ignore using a service for outbound, make sure it isn’t at home. ISPs often block SMTP traffic to keep people from spamming others from their home. A lot of IP blocklists also auto block home IPs so you may not ever get your messages delivered.

Make sure to set up SPF/DKIM/DMARC. At the very least SPF, DKIM if the platform supports it, and ideally all three or SPF+DMARC. It’s not that hard to configure if you do it as you go instead of years down the line after you have a dozen services sending mail as your domain.

Yep, it gives the same logs for uploading. It’s in a different directory, but all the same type of file. And the fflogs uploader is Linux compatible too

If you use plogons (xivlauncher), you can use IINACT as the parsing plugin and either HUDkit for a separate overlay program, or LMeter (this fork that’s still maintained) for a plugin overlay. I use the latter perfectly fine on my Steam Deck and my Linux desktop

My Nvidia card says no to Wayland+KDE :( incredibly laggy and unresponsive ui

We added a tilt sensor to our door that shows the state of the door for the most part. The threshold we have it at doesn’t detect if it’s partly open, but that’s okay for us because we never leave it cracked

Our solution that we set up years ago was to connect a Shelly to circuits on a normal, dumb door opener. The Shelly triggers open/closed itself and since the signal comes from the opener, there’s no crypto nonsense to figure out. It always works, no matter what MyQ/Chamberlain/LiftMaster do. Bonus, it also works if you have a very old opener.
We also supplemented this with a tilt sensor so we know the state of the garage door. The door can still be cracked and not registered as opened, but that’s a compromise we’re okay with since we never leave it intentionally cracked.

DO NOT REDEEM

Yeah you’d need an L7 application layer filtering firewall to catch DoH since it would detect the SSL packet signature on port 53. Unfortunately that balloons the cost of the device past a reasonable level for a home aficionado.
A workaround for now would be to block known public servers that use DoH like Google DNS, since a lot of devices are adding features to enable DoH by default at the OS level