Thank you. I’m not too worried about installation as long as they fit in the outlet box. I’ll look into these.

North America yes. I’ll look at Innovelli.

In the song the Sk8r boy is the hero who triumphs in the end so i think it makes sense.

Octoprint is what I use. Slicing is probably the thing it woukd be least good at but all the rest is good. And theres an api to write plugins for if youre into that sort of thing.

You are correct that this is technically in code and would protect against shock hazards in a neutral error situation but you also get the opportunity for the outlet to pop during the day when nobody is home and the battery to die.

We had a situation in our old house where someone who was technically correct but didn’t think it through had a gfci outlet upstream of the refrigerator outlet. Thankfully it popped while someone was home and we got everything corrected before we lost everything in the fridge.

1. The order doesnt matter as long as they are the same drives, you dont have a usb dock or raid card in front of them (ie sata/sas/nvme only)and you have enough of them to rebuild the array. Ideally all of them but in a dire situation you can rebuild based on 2 out of 3 of a Raid Z1

2. You can do that, you shouldn’t but you can. I’ve done something similar before in a nasty recovery situation and it worked but don’t do it unless you have no other option. I highly recommend just downloading the config file from your current truenas box and importing it into a fresh install on a proper drive on your new machine.

3. Sort of already mentioned it but you can take your drives, plug them into your new machine. Install a fresh Truenas scale and then just import the config file from your current setup and you should be off to the races. Your main gotcha is if the pool is encrypted. If you lose access to the key you are donezo forever. If not, the import has always been pretty straightforward and ive never had any issues with it.

4. Lots of people virtualize truenas and lots of people virtualize firewalls too. To me, the ungodly amount of stupid edge cases, especially with consumer hardware that break hardware passthrough on disks (which truenas/zfs needs to work properly) is never worth it.

I actually run mine in a 12 year old castoff Thinkpad. 4 GB ram total. More than enough to run it because I run a DNS server, a dashboard and a speedtest server on the same machine.

I didn’t realize it was that recent of an addition to the NEC. Weve only lived in super old houses where everything was always needing completely redone. I was usually replacing 2 conductor and cloth-jacketed stuff everywhere.

That was around 2012 and I remember the electrician we hired at the time mentioned it being a thing so that makes sense.

Current national electrical code in the US (since the 1980s) is a neutral in every switch box. Before then a switch loop was allowed so you see a lot of older construction with those.

You also see newer construction with those where Uncle Dave™ decided it was easier to only have to run a wire down from the light rather than fish it up through the crawlspace, NEC be damned.

Our claim we got all up front but that is all good info to know. Thanks!

Just had our roof and siding redone after hail damage. We were told that the exterior insulation built into the siding was minimal and not worth the extra cost for the benefit. If you already have it and it just needs repaired that’s a different story.

From what we could tell, the main difference between exterior contractors was the brand of shingles and siding they use and how they structure their quotes. The job is pretty much the job other than if you choose to do different types of siding on different parts of the house.

We chose our contractor based on someone else we know that had good experience with them and them being local to us in case we had any issues or wanted to make a warranty claim (they offered a 5 year workmanship guarantee). Pretty much all roofing people also do siding. Most do windows too. Our guy did windows, roofing, siding, insulation and gutters despite only having “roof” in his business name.

Just get 3 quotes and see who you like. Also, if you are doing anything through an insurance company, DO NOT sign anything from an exterior contractor to let them negotiate with the insurance company on your behalf. If they came door to door, that’s often something they will ask for. Just assume that most of those door-to-door folks are in the same category as ambulance-chasing lawyers and don’t trust them at all.

Also, if you are going through insurance and the contractor wants to see your claim, remove all dollar amounts from the claim before you share it. Let them give a quote based on what they value the job at rather than based on how much money they know for a fact you have.

Also also, it’s illegal in a lot of jurisdictions, if not all, for a contractor to tell you that they will reimburse or refund the amount of an insurance deductible if you make a claim or if you choose them to do the work. So if any of them said that it’s immediately shady if not downright illegal.

I used Plex for a long time, switched to Jellyfin a few years ago. If it’s not equally as good it’s better.

I have also had a lot less trouble with containerizing it and settings being reloaded after a rebuild but that may just be me.

All I see around is old Cisco enterprise stuff and 1000 would be a low price for that. Not to mention the potential for quite loud fan noise.

Unifi has one with 10 gig uplinks for the same price as used Cisco stuff and it has poe also. Still 1600 bucks though.

I use Syncthing on all my endpoints Windows and Linux (can’t speak for Mac) to sync to my TrueNAS server. It has a built in tool to just back up to backblaze on a certain schedule.

I know you can use Syncthing with unraid in Docker. I have it set up so sync all endpoints to my server and then the server pushes the latest changes back to all the endpoints. This is overly redundant and you don’t have to do it that way but all endpoints and my server would have to die at the same time before I lost any data. It’s sort of a backup scheme in and on itself.

I use Heimdall. You can set it up in no time with docker compose and manage it all through the web interface after that.

Its simple but also has some neat integrations with certain apps and will give live stats for certain things. Like pihole gives you live stats on what’s being blocked for instance.

https://docs.linuxserver.io/images/docker-heimdall